誠實守信、客戶至上注重工作細節，提高服務品質

　　佛山市精燃機電設備有限公司專業制造回轉窯焚燒爐燃氣燒嘴，得到了客戶的高度認可。

　　回轉窯焚燒爐燃氣燒嘴是一種適應性很強，能焚燒多種液體和固體廢物的多用途焚燒爐燒嘴。除了重金屬、水或無機化合物含量高的不可燃物外，各種不同物態(固體、液體、污泥等)及形狀(顆粒、粉狀、塊狀及桶狀)的可燃性廢物皆可送入回轉窯中焚燒。回轉窯焚燒爐燃氣燒嘴技術可行性指標較高，易于操作。從目前國內外的情況來看，采用回轉窯焚燒爐燃氣燒嘴對危險廢物進行處理的比例是較高的。

　　使用精燃機電制造的回轉窯燒嘴的回轉窯焚燒爐具有以下特點

　　①本設備可同時焚燒固體廢物、液體、氣體、對焚燒物適應性強;

　　②焚燒物料翻騰前進，三種傳熱方式并存一爐，熱利用率較高;

　　③燃氣燒嘴壽命長而且改變溫度方便，費用低;

　　④傳動機理簡單，傳動機構均在窯外殼，設備運轉安全，維修簡單;

　　⑤對焚燒物形狀、含水率要求不高;

　　⑥回轉窯內較長的停留時間和700℃的高溫，使危險廢物全面熱解，部分低燃點垃圾基本燃盡;二燃爐強烈的氣體混合使得煙氣中未完成燃燒物完全燃燒達到有害成分分解所需的高溫(1150℃)，高溫區煙氣停留為2秒;不但使垃圾焚盡燒透，還從源頭有效地分解了二惡英;

　　⑦良好的密封措施和爐膛負壓，保證有害氣體不外泄;

　　⑧設備運轉率高，年運轉率一般可達90%以上，操作維修方便;

　　⑨回轉窯內增設強化換熱及防止結渣裝置，在提高焚燒率的同時擴大了焚燒爐對廢物的適應性;

　　⑩ 將傳統二燃室演變為二燃爐，提高了灰渣的燃盡率，提高了回轉窯的焚燒效率，同時具有常溫出渣、渣料破碎、密封鎖風等綜合功能。本設備成熟可靠，可完全國產化，并已有豐富的制造經驗。

　　回轉窯焚燒爐燃氣燒嘴，回轉窯燃燒系統，就選擇佛山市精燃機電設備有限公司!!!!

Foshan fine combustion mechanical and Electrical Equipment Co., Ltd. specializes in manufacturing gas burners for rotary kiln incinerators, which has been highly recognized by customers.

The gas burner of rotary kiln incinerator is a kind of multi-purpose incinerator burner with strong adaptability, which can burn a variety of liquid and solid wastes. In addition to the nonflammables with high content of heavy metals, water or inorganic compounds, all kinds of combustible wastes with different physical states (solid, liquid, sludge, etc.) and shapes (particle, powder, block and barrel) can be sent to the rotary kiln for incineration. The technical feasibility index of gas burner of rotary kiln incinerator is high and easy to operate. From the current situation at home and abroad, the proportion of hazardous waste treatment by using gas burners of rotary kiln incinerators is relatively high.

The rotary kiln incinerator with the rotary kiln burner manufactured by the fine combustion machine has the following characteristics

① The equipment can burn solid waste, liquid and gas at the same time, and has strong adaptability to incineration;

② Three ways of heat transfer coexist in one furnace, and the heat utilization rate is high;

③ Gas burner has long life, convenient temperature change and low cost;

④ The transmission mechanism is simple, the transmission mechanism is all in the kiln shell, the operation of the equipment is safe and the maintenance is simple;

⑤ The requirements for the shape and moisture content of the incineration materials are not high;

⑥ The long residence time and high temperature of 700 ℃ in the rotary kiln make the hazardous waste fully pyrolyzed, and part of the waste with low ignition point burn out basically; the strong gas mixing in the second combustion furnace makes the unfinished combustion in the flue gas reach the high temperature (1150 ℃) required by the decomposition of harmful components, and the flue gas in the high temperature zone stays for 2 seconds; it not only makes the waste burn out completely, but also decomposes the dioxin effectively from the source;

⑦ Good sealing measures and furnace negative pressure to ensure no leakage of harmful gas;

⑧ The operation rate of the equipment is high, and the annual operation rate is generally over 90%, which is convenient for operation and maintenance;

⑨ The rotary kiln is equipped with a device to strengthen heat exchange and prevent slagging, which not only improves the incineration rate, but also expands the adaptability of the incinerator to waste;

⑩ The traditional secondary combustion chamber is transformed into a secondary combustion furnace, which improves the burn out rate of ash and slag, improves the burning efficiency of rotary kiln, and has the comprehensive functions of normal temperature slag discharge, slag crushing, sealing and air locking. The equipment is mature and reliable, can be completely localized, and has rich manufacturing experience.

Gas burner of rotary kiln incinerator, combustion system of rotary kiln, Foshan fine combustion Electromechanical Equipment Co., Ltd!!!!